Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

BMX

S & M Bikes Slam XLT Handlebar
$64.99 - $74.99
Over 10 years ago, S&M started making their own bars by hand in their Santa Ana, CA shop because they weren't pleased with the other offerings out there. Their Slam XLT bars are nice and wide at 28 inches, with a 3/4-inch crossbar and an 8-inch rise. And at 1.7 pounds, they're nice and light, too. This width helps you get more leverage coming out of the gate, while jumpers and street riders like the extra stability it brings in the air. They're made from butted 100% heat-treated chromoly for serious durability and the clamping area is deeply knurled. Set 'em and forget 'em.
S & M Bikes Pitchfork (24-inch)
$129.99 - $149.99
Ahhh yes, the legendary Pitchfork. From the trails to the streets, this fork has you covered. S&M builds these True Temper chromoly beauties in their Santa Ana, CA shop with years of manufacturing knowledge. With laser-cut dropouts, a CNC'd top cap and a zinc coating before painting, the Pitchfork is ready to rumble. Following in that tough style, the tried and true straight-leg design has seen more action than a Bruce Lee movie marathon, so you know it can handle what you're throwing at it.
S & M Bikes Race XLT Fork (24-inch)
$129.99 - $149.99
After months of designing and testing prototypes, S&M brings you the Race XLT Fork! Developed with direct feedback from racers, this 100% American-made beauty is ready for the main event. Its double-butted chromoly legs are wicked light and supremely strong, while the 1-piece chromoly steerer is compatible with both integrated and standard headsets. So get out there and crash the gates and smoke those fools to the first corner.
S & M Bikes Pitchfork (26-inch)
$129.99
Ahhh yes, the legendary Pitchfork. From the trails to the streets, this fork has you covered. S&M builds these True Temper chromoly beauties in their Santa Ana, CA shop with years of manufacturing knowledge. With laser-cut dropouts, a CNC'd top cap and a zinc coating before painting, the Pitchfork is ready to rumble. Following in that tough style, the tried and true straight-leg design has seen more action than a Bruce Lee movie marathon, so you know it can handle what you're throwing at it.
S & M Bikes Fastpitch Fork (990s)
$129.99 - $149.99
Play in the big leagues with S&M's Fastpitch Fork. This double-butted, tapered chromoly fork is rugged enough to tackle nose wheelies, flat landings, and anything else you can throw at it. The laser-cut 3/8-inch slot dropouts only add to the toughness, along with the 1-piece CNC-machined 4130 chromoly extruded steerer. And at only 2 pounds, the Fastpitch keeps you feeling feathery as you fly off that staircase. It's topped off with a 4Q Baked Post-Weld heat treatment for strength.
S & M Bikes Race XLT Dub Fork (20mm Axle)
$129.99
With its 20mm thru-axle compatibility, S&M's Race XLT Dub Fork gives you stiffness and control right out of the gate and all the way across the finish line. It's made from double-butted 4130 chromoly for ruggedness that leaves the weight penalty at home. A 1-piece CNC-machined chromoly steerer adds to the stiffness and control you'll love diving into the berms and over the tabletops. It's heat-treated too for one final blast of strength.
S & M Bikes Aluminum Handlebar
$49.99
Lighten up your race rig with S&M's Aluminum Handlebar. The hole shot is within reach with these feathery bars keeping your ride light so you can focus on getting off the line quicker than everyone else. The 8-degree backsweep keeps you comfortable and in control too. Made of light but tough 6061 T-6 aluminum, S&M's Aluminum Bars inspire confidence on the track.
S & M Bikes Fastpitch Fork
$129.99 - $149.99
Play in the big leagues with S&M's Fastpitch Fork. This double-butted, tapered chromoly fork is rugged enough to tackle nose wheelies, flat landings, and anything else you can throw at it. The laser-cut 3/8-inch slot dropouts only add to the toughness, along with the 1-piece CNC-machined 4130 chromoly extruded steerer. And at only 2 pounds, the Fastpitch keeps you feeling feathery as you fly off the lip. It's topped off with a 4Q Baked Post-Weld heat treatment for team-worthy strength.
S & M Bikes Credence 8.7-inch Handlebar
$59.99 - $69.99
Get rowdy just like the guys at S&M intended you to with the Credence Bar. It's made from 4130 chromoly throughout for strength you'll need at the trails or street, and the dual radius bends increase strength even more just case you land flat or case a gap. With a 29-inch width and an 11-degree backsweep, you get the ideal riding position with all the control to navigate your favorite urban line.
S & M Bikes Hoder High Handlebar
$59.99 - $69.99
S&M's Hoder High Bars are way up there, just like you when you pull back and launch off your favorite feature. A 9-inch rise gives you plenty of leverage, and an 11-degree backsweep puts you in the perfect position for awesome control. It's American-made so you know you're getting S&M's legendary quality. It's light, tough, and comfortable, so get out there and push your limits!
S & M Bikes Pitchfork 990 (24-inch)
$129.99 - $149.99
Ahhh yes, the legendary Pitchfork. From the trails to the streets, this fork has you covered. S&M builds these True Temper chromoly beauties in their Santa Ana, CA shop with years of manufacturing knowledge. 990 mounts let you run a brake up front for exceptional control. With laser-cut dropouts, a CNC'd top cap and a zinc coating before painting, the Pitchfork is ready to rumble. Following in that tough style, the tried and true straight-leg design has seen more action than a Bruce Lee movie marathon, so you know it can handle what you're throwing at it.
S & M Bikes Pitchfork 990 (22-inch)
$129.99 - $149.99
Ahhh yes, the legendary Pitchfork. From the trails to the streets, this fork has you covered. S&M builds these True Temper chromoly beauties in their Santa Ana, CA shop with years of manufacturing knowledge. 990 mounts let you run a brake up front for exceptional control. With laser-cut dropouts, a CNC'd top cap and a zinc coating before painting, the Pitchfork is ready to rumble. Following in that tough style, the tried and true straight-leg design has seen more action than a Bruce Lee movie marathon, so you know it can handle what you're throwing at it.
S & M Bikes Pitchfork (22-inch)
$129.99 - $149.99
Ahhh yes, the legendary Pitchfork. From the trails to the streets, this fork has you covered. S&M builds these True Temper chromoly beauties in their Santa Ana, CA shop with years of manufacturing knowledge. With laser-cut dropouts, a CNC'd top cap and a zinc coating before painting, the Pitchfork is ready to rumble. Following in that tough style, the tried and true straight-leg design has seen more action than a Bruce Lee movie marathon, so you know it can handle what you're throwing at it.
S & M Bikes Pitchfork (18-inch)
$129.99
Ahhh yes, the legendary Pitchfork. From the trails to the streets, this fork has you covered. S&M builds these True Temper chromoly beauties in their Santa Ana, CA shop with years of manufacturing knowledge. With laser-cut dropouts, a CNC'd top cap and a zinc coating before painting, the Pitchfork is ready to rumble. Following in that tough style, the tried and true straight-leg design has seen more action than a Bruce Lee movie marathon, so you know it can handle what you're throwing at it.
S & M Bikes Logo Grips
$9.99
Whether you're racing or jumping you need a good grip so slip S&M's Logo Grips on. A soft, comfy outer layer feels good on your hands while underneath a harder sleeve increases durability. This is a relatively thin grip with a 140mm length and medium flange. Grip it and rip it!
S & M Bikes Challenger Stem
$59.99 - $69.99
S&M's Challenger Stem has reached legendary status. This made-in-Cali hunk of awesome is built for getting rad on the streets, parks and dirt. Plus, the hardware is Grade 8, so you won't be stripping any Allen bolts any time soon, either.
S & M Bikes Grand Slam Handlebar
$59.99 - $69.99
Over 10 years ago, S&M started making their own bars by hand in their Santa Ana, CA shop and all that manufacturing experience pays off with the Grand Slam bars. They're for the big boys out there who are rough on their gear. At 29 inches, they're nice and wide and they sport a 7/8-inch crossbar plus an 8.25-inch rise. This race-legal width helps you get more leverage coming out of the gate, while jumpers and street riders dig the extra leverage it brings when taking to the air. They're made from butted 100% heat-treated chromoly for serious durability and the clamping area is deeply knurled. Set 'em and forget 'em.
S & M Bikes Credence Turtleneck Stem
$59.99
Light, narrow, and just the right length, S&M's Credence Turtleneck Stem is a go-to for aggressive riders. It's light thanks to 6061 aluminum construction, and an internal cutout keeps weight down even more.
S & M Bikes 5.75-Inch Race Handlebar (29-Inch)
$54.99 - $64.99
S&M's 5.75-Inch Race Handlebars are favored by cruiser-class racers everywhere. They're 29 inches wide and sport a 3/4-inch crossbar and an 5.75-inch rise. They're made from 100% chromoly for serious durability and the clamping area is deeply knurled. Set 'em and forget 'em.
S & M Bikes Race XLT Handlebar (8.25-inch)
$64.99 - $74.99
S&M makes some of the most popular bars out there and it's no secret why. Riders love the durability, the strength and the fact that they're hand made in the US of A. The 100% chromoly Race XLT bars are sick light, perfect for fast racers that want nothing to weigh them down or slow them up. Plus, they're 28.5 inches wide with an 8.25-inch rise.
S & M Bikes Pad Set
$16.99
Wrap up your bike with the S&M Pad Set. It'll protect your paint and your body with a little foam padding covered in the beautiful S&M shield logo.
S & M Bikes Race XLT Handlebar
$64.99 - $74.99
S&M makes some of the most popular bars out there and it's no secret why. Riders love the durability, the strength and the fact that they're hand made in the US of A. The 100% chromoly Race XLT bars are sick light, perfect for fast racers that want nothing to weigh them down or slow them up. Plus, they're 28 inches wide with an 8-inch rise.
S & M Bikes Cruiser Slam Handlebar
$54.99 - $64.99
S&M's Cruiser Slam Handlebars are favored by big, strong racers, and people who still get rad on 24-inch wheels. They're 27 inches wide, sport a 7/8-inch crossbar, and a 5.75-inch rise. They're made from 100% chromoly for serious durability and the clamping area is deeply knurled. Set 'em and forget 'em.
S & M Bikes Hot Seat
$29.99
You don't need to adhere to current trends - you let your riding speak for itself and you rock an S&M Hot Seat. Two inches of cushy foam padding cushions your landing and the wider profile allows your knees to clamp it so you can throw nohanders without the tuck.
S & M Bikes P Guts
$15.99
S&M's P Guts are a little ingenious invention that lets you run a railed seat on a Pivotal post - perfect for those awkward situations when you realize your favorite old seat doesn't fit on your new school frame with an integrated Pivotal post. It also works great if you want the fore-aft adjustment from a railed seat on a Pivotal post.
S & M Bikes P Rail Seat
$9.99
S&M has created a new classic with the P Rail Seat combining retro looks with the comfort and weight today's riders demand. The slim design guarantees it won't get in your way and stout 8mm rails make it durable.
S & M Bikes Coxie Directors Seat
$33.99
You're the shot-caller with S&M's Coxie Directors Seat on your go-to rig. The embossed microfiber cushion seat looks rad and is comfortable when you need it. What else would you expect from James Cox's signature saddle? At 11.6 ounces, it's light too, and it stays put on a Pivotal seatpost.
S & M Bikes Hoder Handlebar
$59.99 - $69.99
These bars will let you get as nutty as the man who designed them, Mike Hoder! Well, maybe not, but S&M poured the same quality and durability into these bars as they do with all their gear to help you go as big as possible. They're made by hand in Cali from 100% chromoly with a tall 8.625-inch rise and a solid 30-inch width.
S & M Bikes Enduro Stem
$64.99 - $74.99
S&M's Enduro Stem is your reliable go-to stem for going big, going fast, and getting rad. It's light and stylish to make your rig look even cooler than it already does. You get 30mm of rise in the upright position and 1.5mm in the inverted position so you can find the right feel for you.
S & M Bikes 5-Inch Race Handlebar
$54.99 - $64.99
To get your front end nice and low on your cruiser, pick up S&M's 5-Inch Race bars. They're 29 inches wide and sport a 3/4-inch crossbar plus a 5-inch rise. They're made from 100% chromoly for serious durability and the clamping area is deeply knurled. Set 'em and forget 'em.
S & M Bikes Beringer XLT Handlebar
$64.99
This is the dual-radius bar designed and ridden by Matt Beringer himself. S&M poured the same quality and durability into these bars as they do with all their gear. They're made by hand in Cali from 100% chromoly with an 8-inch rise and a 27-inch width. The lower radius is tight for better knee room and the wider top radius adds strength.
S & M Bikes Intrikat Handlebar
$59.99 - $69.99
Hey flatlanders, S&M's Intrikat Handlebars are built with your style in mind. The tall rise gives you more leverage with fewer spacers, and the tight bends start close to the clamping area to maximize clearance, freeing up space for your legs to do their thing. They're tough as nails too thanks to the full chromoly construction and the 4Q Baked Post-Weld heat treatment.
S & M Bikes Race XLT Fork (20-inch)
$129.99 - $149.99
After months of designing and testing prototypes, S&M brings you the Race XLT Fork! Developed with direct feedback from racers, this 100% American-made beauty is ready for the main event. Its double-butted chromoly legs are wicked light and supremely strong, while the 1-piece chromoly steerer is compatible with both integrated and standard headsets. So get out there and crash the gates and smoke those fools to the first corner.
S & M Bikes ODI Clamp On Grips
$19.99
A twisting grip is great on a moto but if your grip starts spinning in the middle of a nose grind you won't be so happy. Use S&M's ODI Clamp On Grips for a solid hold on your bike no matter what. The outer layer is soft for comfort while the inner sleeve is hard for durability, and end caps protect the bar when the bike gets dropped.
S & M Bikes Lil Redneck Stem
$59.99 - $69.99
S&M's Lil Redneck takes the legendary strength of all S&M hardware and packs it into a smaller package. Narrow, short, and machined like mad, the Lil Redneck saves weight while maintaining the strength you expect. With Grade 8 Allen hardware, you know you won't be stripping bolts, either.
S & M Bikes Aluminum Handlebar (No Crossbar)
$34.99
Lighten up your race day rig with S&M's Aluminum Handlebars (No Crossbar) and the hole shot is within reach. At just over half a pound, these feathery bars keep your ride light so you can focus on getting off the line quicker than everyone else. The 8-degree backsweep keeps you comfortable and in control too. Made of light but tough 6061 T-6 aluminum, S&M's Aluminum Bars inspire confidence on the course.
S & M Bikes TuffMan Sprocket
$49.99 - $54.99
S&M's TuffMan Sprocket is light, strong, and functional, and if you look at it the right way it kind of looks like a dude with a fat stomach is holding the outer ring in place. It was machined down from a solid piece of aluminum and features a 15/16-inch center bore.
S & M Bikes T3 Race Handlebar
$64.99 - $74.99
S&M makes some of the most popular bars out there and it's no secret why. Riders love the durability, the strength and the fact that they're hand made in the US of A. The specs on these bars are perfect for pro-sized riders who like their bars a bit further back. The T3 Race bar is 28 inches wide with an 8-inch rise. By butting the chromoly tubes on these bars 13 times, S&M have made them race light and sick strong where they need to be.
S & M Bikes Smal Slam Handlebar
$54.99
Over 10 years ago, S&M started making their own bars by hand in their Santa Ana, CA shop because they weren't pleased with the other offerings out there. The Smal Slam bars are 28 inches wide and sport a 3/4-inch crossbar and a 7.5-inch rise. They're made from butted 100% heat-treated chromoly for serious durability and the clamping area is deeply knurled. Set 'em and forget 'em.
S & M Bikes Redneck FLT Stem
$79.99 - $89.99
S&M's stems are on more pros' bikes than we can count, and for good reason. Their Redneck FLT is a flatland-specific stem that keeps your bars right where you want them no matter where you are on the bike. The hardware is Grade 8, so you won't be stripping any Allen bolts any time soon, either.
S & M Bikes Race XLT Stem
$64.99 - $74.99
S&M's Race XLT Stem is perfect for any rider that likes to run a top load. Don't let the name fool you, the 6061-grade aluminum makes it strong enough for the streets, too. Run it top or upside down, whichever you prefer. Like all of S&M's stems, it's hand-made in Cali. The hardware is Grade 8, so you won't be stripping any Allen bolts any time soon, either.
S & M Bikes XLT Seat Clamp
$9.99
The XLT Seat Clamp from S&M holds your seatpost with a death grip while weighing in at a scant .9 ounces. It fits 25.4mm seatposts and has laser etched logos. Get one.
S & M Bikes Slam Handlebar
$54.99 - $64.99
Over 10 years ago, S&M started making their own bars by hand in their Santa Ana, CA shop because they weren't pleased with the other offerings out there. Their Slam bars are for the big boys who are rough on their gear. At 28 inches, they're nice and wide and they sport a 7/8-inch crossbar and an 8-inch rise. This race-legal width helps you get more leverage coming out of the gate, while jumpers and street riders like the extra stability it brings in the air. They're made from butted 100% heat-treated chromoly for serious durability and the clamping area is deeply knurled. Set 'em and forget 'em.
S & M Bikes Redneck XLT Stem
$59.99 - $69.99
S&M's stems are on more pros' bikes than we can count, and for good reason. Their Redneck XLT is light enough for the track and strong enough for the streets. Like all of S&M's stems, it's hand-made in Cali from CNC'd 6061-aluminum for low weight, stupid strength and slip-free action. The hardware is Grade 8, so you won't be stripping Allen bolts any time soon, either.
S & M Bikes Randy Brown Grips
$9.99
Randy Brown rides hard, so he needs something comfy to hold on to. S&M's Randy Brown Grips are thin so your fingers wrap all the way around for a solid grasp and the soft rubber gives you an amazing feel with a bit of shock absorbtion.
Odyssey Graduate Peg
$24.99
This plastic peg features a full 4130 core with a long-lasting, fast-sliding, plastic sleeve. - 1.5-inch outer diameter - 14mm with 3/8-inch adapter - Sold individually - Weight: 7.6oz - Replacement sleeves sold separately
Odyssey Ghost Brake Pads
$8.50
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable too. The Ghost Pad addresses the hassles of brake pad installation by eliminating the traditional dome shaped washers used for toe-in. The pad improves stiffness by building the toe-in into the pad shape and utilizing a solid extruded aluminum frame at its core. The Ghost Pad’s assembly consists of simply lining it up with the rim and tightening down an M6 female bolt. Comes stock on the Springfield brake. SPECS Hardware: - In-bound bolt, 5mm Hex Key, M6x1.0 Thread - Pad Material: Black (standard) or Clear Rubber (Soft) - Weight: 1.0oz / 28g (pair)
Odyssey Tripod Post
$25.99
Odyssey is proud to offer their new tripod post. It allows for the two most popular seat angles amongst riders and it’s clean, light and easy to install. SPECS - 25.4mm diameter - 6061-T6 Aluminium, CNC machined
Odyssey Race Linear Kable
$14.99
Odyssey took their proven Linear Slic Kable housing and replaced the steel linear wire with aluminum. Utilizing the aluminum wire in the housing saves you significant weight, roughly 30%. This cable also features their specially designed “volcano” ferrules that they’ve used since 2008 to prevent housing blowouts. This Kable also comes with color-coaded inner wires and ball ends to differentiate between their regular Linear’s Race Linear Slic Kable.
Odyssey Broc Raiford Signature Grips
$9.99
Broc Raiford can bunnyhop over a house so it’s only right that he has his own grips to hold on to. Broc’s signature grip comes in at 160mm in length and features rope detailing on the ends to tie in with Broc’s nautical theme.
GSport Uniguard Hub Guard
$14.99
The new Gsport Uniguard is a simple, inexpensive functional guard that eliminates the need to spread the dropouts. It’s made from Heat-Treated Cr-Mo Steel and is LHD and RHD compatible as well as Drive and Non-Drive compatible. All bases covered. Available in 14mm or 3/8?.
Odyssey R/F Series Pre-Load Bolt
$19.99
This custom 7075-T6 aluminum pre-load bolt design is included with every Odyssey fork. - Fits both a 6mm and 8mm allen key. - Front brake cable thru-way hole for removal without disconnecting brake hardware. - Designed with an easy-cut thread groove if you cut your fork’s steerer tube down.
Odyssey Aitken Tires
$25.99
Mike Aitken's popular signature tires for street and dirt. Ideal for use at high speeds. - 20 × 2.25, and 20 x 2.45 Dual ply casing
Odyssey Aaron Ross V2 Tires
$25.99
Aaron’s signature tires feature an updated block tread and bigger sizing. The uniform block tread is reminiscent of his original tire, but freshened up. Coming in at 20x2.30" and 20x2.40"
Odyssey Sweepstakes Bars
$74.99
The Sweepstakes bar is a big, comfortable bar that comes in at 29 inches wide and 9 inches tall. SPECS - 9-inch rise - 29-inch width - 10.5° backsweep - 4° upsweep - Multi-Butted41-Thermal processed 4130 chromoly - Weight 34.3 oz.
S & M Bikes Widemouth Pitchfork
$139.99 - $144.99
S&M's Widemouth Pitchfork is all about big: big lines, big tricks, and most importantly, big tires. It's got all the strength you expect from a Pitchfork thanks to the double-butted, tapered 4130 chromoly construction and the 1-piece CNC'd chromoly steerer, so go as big as you want with confidence. It may be big, but it's still feathery light at right around two pounds. Like to run pegs? No problem. The Widemouth is peg compatible. Run just about any tire out there and grind away; the Widemouth gives you an extra helping of rad for whatever shredding you want to do.
Odyssey Racing Spokes
$34.99
Odyssey racing spokes use butting dimensions that are tailor-made for BMX racing, and they’re still strong enough to handle some light street riding too. You’ll save roughly an ounce per wheel on 36’s. Only the best stainless steel has been used, and the gradual butting transitions are ideal for the stresses that a 20-inch wheel has to endure. - Proprietary professional-grade stainless steel. - BMX specific butting transition dimensions.
WeThePeople Sterling - Pete Sawyer Signature Fork
$159.99
Ground breaking riding deserves a fork so burly fork that it can literally break the ground, should the need arise. WeThePeople's Sterling fork is masterfully crafted to meet the insane demands of team rider, Pete Sawyer. The Sterling can handle it all, and it looks good doing it. Find a matching color scheme on the Sterling signature frames too! • Material: Full-liquid post heat-treatment on 4130 “M2“ chromoly • Steerer Length: 170mm • Offset: 32mm • Dropout: 6mm laser cut & CNC machined, heat-treated 4130 chromoly, 3/8'' axle • Fully CNC’d steerer, single butted integrated crown race designed to work with integrated headsets with a 45° bearing
Odyssey Graduate PC Peg
$18.99
The 4.5-inch peg features a full 4130 core with a long-lasting, fast-sliding, plastic sleeve. - Sold individually - 14mm with 3/8” adapters only - Replacement sleeves sold separately - 4.5" (length) x 1.5" (outer diameter) - 4.5 oz (9 oz for a pair)
Odyssey Mid Bottom Bracket
$18.99 - $24.99
- Made to fit crank spindles and press-fit Mid BB frames. - Simple and easy to install. - Includes an assortment of spacers to optimize chainline and crank clearance. - Odyssey 6061-T6 aluminum dust spacer included.
Page 1 of 3 Next page