Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Stan's NoTubes Presta Removeable Valve Core
$2.00
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
Whisky Parts Co. Tubeless Conversion Rim Tape Kits
$8.00 - $16.00
Whisky Parts Co. Tubeless Rim Tape.
Kink Boulevard Hub Guard
$6.99
Designed exclusively for use with the Kink Boulevard front hub, the Boulevard guard is injection molded from a durable nylon material. These guards slide directly over the existing hub hardware, so no additional parts or disassembly are required. This guard can be used on one or both sides of the Boulevard hub, providing protection where you need it.
Kink Boulevard Hub Bearings
$19.99
Sealed cartridge bearings last a long time, but nothing lasts forever (except Kink bikes, of course), and eventually all bearings need to be replaced. Keep a set of these replacement bearings around for your Kink Boulevard hub and ensure you're always rolling smoothly.
Kink Universal Driver Guard
$24.99
The Kink Universal Driver guard is designed to fit most modern freecoaster and cassette hubs using either an 8T or 9T driver. The guard is made from heat-treated chromoly steel, giving it a ton of strength and long lifespan. The slim chromoly design means it can slide between your existing hub hardware and dropout, which allows for easy installation with only a wrench or socket to loosen and tighten axle nuts
Sunlite Rim Grommet
$0.80
- Converts Schrader rims to Presta - Rubber - Sold individually
Kink Yukon Axle Bolts
$19.99
A reliable set of axle bolts that you can get on and off reliably is essential to your bike. These replacement bolts for your Kink Yukon hub are just what the doctor ordered for ground-down, beat-up, and rounded-off axle bolts. They have 17mm wrench flats with 6mm allen sockets for quick installation/removal and burly tightening torque.
Origin8 RD/CX/GX/MT-1110 Elite Skewer
$17.00
- Elite Series skewers for road, cyclocross, gravel, and MTB applications - AL6061 alloy lever with CrMo axle - Available for 100mm, 130mm, and 135mm OLD spacing - Spacing / Axle: QR - Wt: 53g
Surly Ultra New Hub Axle Kit
$28.82 - $34.15
Surly Ultra New Axle Kits are for upgrading the internals of your existing Surly New hubs or replacing the internals on your Surly Ultra New hubs. -Compatible with Surly New hubs (upgrade kit) and Surly Ultra New hubs (replacement kit) - Each kit contains an axle, two 6901 cartridge bearings, two aluminum dust shields, two stainless steel cones, two stainless steel 6x1mm bolts, and two stainless steel bolt washers - Axle is quick release and bolt-on compatible; bolts included, QR is NOT included - Standard Surly New hubs come stock with 7901 bearings; this kit uses 6901 bearings which are non-angular
Race Face Turbine/Aeffect End Cap Set
$22.99
Axle conversion kits for Race Face Turbine/Aeffect hubs. - Select from front or rear applications
WeThePeople Helix Freecoaster Hub
$154.99
WeThePeople took the tried and tested features from the best freecoasters to date and then developed their very own patented 3 point clutch friction system, making the Helix Freecoaster the most durable and reliable free coaster of its kind. Paired up with a pair of WTP plastic hub guards, the Helix will roll front or back like butter and hold up to any peg abuse that comes its way. - 9T driver - 14mm axle
Ritchey Comp Hub Axle Adapter Conversion Kit
$19.95
Authentic Ritchey hub conversion kit for mountain bike hubs. - Convert 15mm (OD) alloy axle to QR9 ID - Quick release skewer not included
Ritchey WCS Freehub Body for Apex and Zeta II 10/11 speed Campagnolo
$59.95
Authentic replacement freehub body for Ritchey V2 Apex and Zeta Phantom Flange road wheels - 10/11-speed Campagnolo
Ritchey WCS Freehub Body for Apex and Zeta II 11 speed Shimano
$59.95
Authentic replacement freehub body for Ritchey V2 Apex and Zeta Phantom Flange road wheels - 11-speed Shimano
Ritchey WCS Front Hub Bearing Kit: Trail and Vantage V1
$22.97
Authentic service bearing kit for Ritchey mountain bike wheels. - Replacement bearings for Trail and Vantage V1 front hubs
Ritchey WCS Rear Hub Bearing Kit: Apex and Zeta
$49.95
Authentic service bearing kit for Ritchey mountain bike and road wheels. - Bearing service kit for V5 (Zeta and Apex V1) rear hubs Includes #6901 (x1pc) & #6902 (x1pc)
Ritchey Tubeless Tape: 25mm x 33m Roll
$59.95
- Tubeless tape for converting tubeless ready wheels to tubeless - 25mm x 33M roll
Evo Quincy QR Skewer
$12.99
- Extra long quick release for rear axle mount rack systems
Serfas 2 Tubeless Presta Valves
$29.00 - $35.00
Switching to tubeless or in need of valve replacements? Serfas Tire RX replacement valves will do the trick. Available sizes of 32mm, 44mm, or 60mm valves with removable cores, extra valve core, and Schrader to Presta adapter with core removal tool. Please note, Due to the multi-step chemical process and variables involved in anodizing, colors may vary slightly between batches produced.
Stan's NoTubes Enduro Tubeless Kit
$68.95
Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's Enduro Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes Standard Tubeless Kit
$63.95
Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's Standard Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Wheelsmith Double Butted 14/15/14g (Black) Spoke
$70.00
- Cold forged 304 stainless steel with rolled threads - Lightweight 2.0mm/1.7mm/2.0mm double-butted form - Nipples sold separately - 172g (32 spokes @ 262mm) - Bag of 50
WeThePeople Helix Rear Hub Axle/Cone Set
$32.99
Helix Rear Hub 14mm Axle/Cone Set
WeThePeople Supreme Hub Guards
$23.99 - $36.99
Simply replace the cones on your Supreme front and cassette hubs for a perfect fit without having to spread your dropouts. Available in front, rear, and drive side options. These guards now feature a heat-treated chromo insert for longer life.
WeThePeople Helix Driver Guard
$21.99
When you own a freecoaster as good as the Helix, you're going to want to keep it protected. WTP's Helix driver guards work on the drive side of the Helix freecoaster and replace the cones for a perfect fit without having to spread your dropouts. - Fits Helix V1 and Helix V2 freecoaster hubs - Available in 7075-T6 alloy or Nylon Fiberglass - Comes with heat-treated chromoly adaptor to replace hub cone nuts for perfect fit
Problem Solvers Booster
$19.99 - $24.99
Booster thru-axle hub spacer kits are designed to give your non-Boost front and rear thru-axle hubs the boost they need to fit any Boost-compatible frame or fork.
Problem Solvers Thru-Axle/QR Adaptor
$19.99
Thru-Axle hub adapters allow the use of 100 mm front thru-axle hubs in 100 mm QR forks. -Allows the use of modern thru-axle wheels in forks designed for quick-release compatible hubs -100 mm front hub spacing only -CNC-machined AL-6061
Shimano Dura-Ace 9000 Quick Release
$64.00
Shimano Dura-Ace 9000 Hub Quick Release Skewer. - Axle Type: Standard QR
WeThePeople Arrow Front Hub Axle/Cone Set
$28.99
Get your WeThePeople Arrow Front Hub Axle/Cone Set and freshen up that front end that's a little wobbly after that last time you cased it on the spine.
Ritchey WCS Zeta Disc Rear Hub Conversion Kit
$49.95
Conversion kits for Ritchey hubs.
Page 1 of 11 Next page