Headsets

Service and replacement parts specifically for Trek Knock Block technology. Genuine replacement parts Get your bike back on the trail with the headset parts you need. - Trek proprietary headset components compatible with Trek Knock Block models - 58-degree headset fits all 2017-2020 Knock Block equipped models - Includes crown race, bearings, top cover, frame chip & fastener - Frame chip has display tabs to connect Bosch Kiox Mount sold separately - Must be paired with Knock Block stem and Knock Block spacers - Knock Block headset spacers not included

Cane Creek compatible integrated style bearings fit directly into headtube. - 36-degree inner chamfer and 45-degree outer chamfer - Crown Race: 30 - S.H.I.S. Lower: IS41 - S.H.I.S. Upper: IS41 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

FSA Standard Headset Bearings

- Gyro compatible, 45/45 degree angular contact cartridge bearings, alloy crown race - Impact: 45x45 degree Campagnolo Integrated - S.H.I.S.: IS42/28.6|IS42/30 - Stack: 8mm/1mm - Color: Black, Orange, Red - Weight: 68g

FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible

A solid choice for 1-1/8in frames, the Orbit Equipe features a sturdy steel lower cup for maximum durability. The top cup is forged alloy, with an alloy top cover. Inside are two low maintenance, easy-to-replace sealed cartridge angular contact bearings. - Bearing Type: Cartridge - Weight: 117g - Crown Race: 30 - S.H.I.S. Lower: EC34 - S.H.I.S. Upper: EC34 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

A key component of the new Ritchey Switch System, Ritchey's newest headset upper is designed to specifically work with the Ritchey Switch Stem to route cables, wires and hydraulic lines from the handlebar through to the bicycle frame. Cables are routed from the handlebar into the headset conduit, which sits on the underside of the Switch Stem and then travel through an opening on the front of the Switch headset spacers before passing through two channels on the top of the headset and into the frame. This system allows headset bearings to perform without any interference from cables, wires, or lines passing through the headtube.

Comp Logic Threadless Headset - Lightweight, precision-machined aluminum cups - Deep cups for solid insertion

Origin-8's SSR Threadless Headset is for 1 1/8-inch threadless forks. It features CNC machined 7075-aluminum cups and stainless-steel cartridge bearings for excellent performance and long life. It also comes in many colors to customize your ride. - 93g including star nut and laser top cap - Stack Height: 28.5mm **Anodized colors will vary from batch to batch and may not match exactly - S.H.I.S.: EC34/28.6|EC34/30

The Classic Logic Threadless Headset is the reliable workhorse of the Ritchey threadless headset range. Now available with our timeless high-polish finish, this smooth and reliable specimen features lightweight, precision-machined aluminum cups, sealed cartridge 45/45-degree bearings, and comes packed with Ritchey Grease. A sealed design promises minimal penetration from the elements. The Classic Threadless Headset adds that classy and reliable detail your bike deserves. - Stack Height: 28.3mm - Material: Alloy - Upper Fit (S.H.I.S.): EC34/28.6 - Lower Fit (S.H.I.S.): EC34/30 - Bearing: Sealed cartridge (ACB)—Ti coated

Origin-8's Pro Fit Threadless Headset is made of light and durable aluminum and boasts smooth and long-lasting sealed cartridge bearings. It also sports nice laser-etched logos.

Origin8's Twistr Semi-Integrated Headset features highly polished sealed angular contact premium bearings ensure smooth operation. Its CNC-machined AL6061 top cover is sealed to keep moisture and grit away from the bearings, and the CNC-machined AL7075 crown race protects the lower bearings and fork. - AL6061 top cap - Forged stainless steel bolt - Includes star nut

The Ritchey Logic Threadless headset features a smaller upper bearing to save weight, while the oversize lower bearing is designed to handle loads. Deep bearing cups promise solid insertion. - Bearing: Retainer ball bearing - Material: Steel/Plastic - Stack Height: 28.3mm

Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Aluminum dual seal crown race protects lower bearing - Interlok spacer compatible - 110 year warrranty

Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our Performance Headset is built to include a black oxide-coated chromium steel bearing and a one-year warranty. Our headsets stand above the rest with three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable. Available in a variety of colors. These EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets. Lower assembly features: - Custom molded dual-lip seal on the crown race to protect the lower bearing in the toughest conditions. - 12.25mm stack. - Service and additional parts available.

Wolf Tooth Performance Headsets feature Black Oxide Cartridge Bearings, balancing quality and price. - Black Oxide Bearings are made from chromium steel for high load capacity and durability - Black oxide coating reduces corrosion

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Integrated bearings fit directly into compatible head tubes without the need of a bearing press. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Aluminum dual seal crown race protects lower bearing - Interlok spacer compatible - 110 year warranty

This is the Integrated Bottom Bearing for the Cane Creek 110 Series headset. Please contact us if you have any questions about which parts are correct for your headset.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

This is the Bottom for the Cane Creek 110 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset. - For 1.5-inch crown race diameter - Stack height: 4mm - 54 grams

Cane Creek's AngleSet transforms your ride. It enables an effective head-tube angle adjustment of up to +/- 1.5-degrees so you can fine-tune your mountain bike's front-end handling to best suit your riding style, local terrain and race course. Installation is straightforward because the AngleSet automatically adjust to fit different head tube lengths and angles. All AngleSet headsets have light, tough, and beautiful machined 7075 T6-aluminum cups with Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. • Technical Description: EC44/40/H12/x • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 44.00mm • Crown Race Seat Dia.: 39.76mm • Crown Race Type: Aluminum, Dual-Seal • Bottom Stack Height: 12mm • Bottom Bearing Type: Top-quality, sealed stainless steel bearings • Material: 7075 aluminum • Weight: 61.02g

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

Hellbender 70 Lite headset.

Hellbender 70 Slam Top Assembly headset.

Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our Performance Headset is built to include a black oxide-coated chromium steel bearing and a one-year warranty. Our headsets stand above the rest with three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable. Available in a variety of colors. These EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets. Upper assembly features: - Ultralight Stem Cap With Integrated Spacer plus an aluminum bolt and a star nut. - 5mm top cover = 16mm total stack - O-ring seal prevents water intrusion around the steerer tube. - Custom-molded upper lip seal provides additional protection for the upper bearing.

Wolf Tooth headsets are machined here in our Minnesota shop with aircraft-grade 6061 aluminum. They are designed to be lightweight, strong, and durable. Performance Headsets with Enduro black oxide bearings have a one-year warranty. Our headsets have three levels of industry-leading custom sealing to protect bearings from the elements and prolong the life of the headset. Available in a variety of colors. These ZS headsets are for frames with internal bearing cups that are pressed into the frame. Lower assembly features: - Custom-molded dual-lip seal on the crown race protects lower bearing in the toughest conditions. - All components are precision machined in-house at Wolf Tooth from aircraft-grade aluminum to ensure the highest level of quality. - Service and additional parts available.

Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our headsets have three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable. Available in a variety of colors. These EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets. Premium Headsets with Enduro stainless steel bearings have a lifetime warranty. Upper assembly features: - Ultralight Stem Cap With Integrated Spacer plus an aluminum bolt and a star nut. - 5mm cover = 16mm total stack, 15mm cover = 25mm total stack, 25mm cover = 35mm total stack. - O-ring seal prevents water intrusion around the steerer tube. - Custom-molded upper lip seal provides additional protection for upper bearing.